The importance of network security in the age of the Internet of Things

July 15th, 2016 by · 1 Comment

This Industry Viewpoint was contributed by Robin Kent, director of European operations at Adax

The speed at which the telecoms industry is needing to keep up with rise of the Internet of Things (IoT) is quite alarming. Network operators are frantically trying to make sure everything is in place to satisfy the inevitable end user demands and expectations. We’ve heard about the benefits IoT can bring for not just consumers looking to build their connected homes and drive connect cars, but a range of different industries including healthcare, manufacturing, and transportation and warehousing, and retail.

We know that capacity and how operators can handle the mass deployment of low speed, low volume IoT networks is a key issue, and will ultimately will determine whether the phenomenon is a success for years to come. However, with this increased traffic comes the major issue of security. Instead of reacting to threats to the core network, which IoT networks will run off, operators need to ensure they plan for the worse and have prevention measures in place for possible hijackers. The repercussions of such a breach can have serious consequences for both the operator and end user.

The huge potential for market growth is one major attraction that IoT offers to operators, yet 86 per cent of them admit they are not yet ready for the concept. In addition, according to research, concerns regarding security are the biggest barrier to implementing IoT among operators, and just 10 per cent said they are fully capable of launching secure IoT services. These are worrying statistics so it’s essential for operators to have peace of mind that their networks are secure.

The first step for operators is to ensure any connection from the IoT device to the core network over S1 and Gb interfaces is fully authenticated. In order to do this, they must invest in and revisit the capabilities of their GTP and SCTP protocols, which will handle the hundreds of connections into the core network. Authentication can be delivered by the RFC 4895 for the SCTP protocol without compromising performance or network monitoring visibility like IPsec/VPNs do. This can prove vital as networks are subject to attacks with greater frequency and demonstrated disastrous outcomes. Another prevention technique operators should be implementing is to provide data analytics and Deep Packet Inspection (DPI) services to identify threats in the data generated by IoT services. Today’s interconnected networks are highly vulnerable to hijacking via insecure SIGTRAN links or rogue network nodes, and application vendors can unknowingly allow the network to be compromised, when presumably ‘secure VPNs’ invisibly transport threats within packets. This issue has to be addressed as a first step to ensure network performance and Quality of Service (QofS) is not compromised.

Another potential headache for mobile operators is that IoT has many additional security requirements because of the nature of the endpoint devices and the potential high level of service criticality. In serving a high volume of devices, networks are exposed to signaling storms, and intentionally malicious Denial of Service attacks. Such attacks can have a serious detrimental impact on devices, and the Quality of Experience the end user expects and demands.

In a bid to tackle such issues, operators should adhere to the GSMA’s IoT Security Guidelines for Network Operators. The guidelines have been designed with the entire IoT ecosystem in mind, including device manufacturers, service providers, developers, and, where this topic of discussion is concerned, network operators. The GSMA describes the most fundamental security mechanisms as; identification and authentication of entities involved in the IoT service; access control to the different entities that need to be connected to create the service; data protection to guarantee the security and privacy of the information carried by the network for the IoT service; and the processes and mechanisms to ensure availability of network resources and protect them against attack. In terms of preventing signaling storms, the guide mentions how operators may, based on a security policy, ‘prevent certain devices from connecting to their network by changing the communication profile of the affected devices or by enacting security policies within the network’s packet core’. The guide also states that network authentication algorithms should be implemented that meet the lifetime expectation of IoT service provider’s endpoint devices. These are two key points that need to be addressed when implementing IoT networks.

Network operators should be taking it upon themselves to set their own security measures to ensure the potential capabilities of IoT can be recognised and embraced. The demand for such services is continuously growing so having the right tools and protocols, such as GTP and SCTP solutions, in place ahead of the expected rush will be vital.

About Adax: Adax is an industry leader in high performance packet processing, security and network infrastructure from Legacy to LTE networks. Its customers include ISPs, MVNOs, the world’s premier telecom equipment manufacturers (TEMs), Value Added Services (VAS) providers and systems integrators. 


If you haven't already, please take our Reader Survey! Just 3 questions to help us better understand who is reading Telecom Ramblings so we can serve you better!

Categories: Industry Viewpoint · IoT, M2M · Security

Join the Discussion!

1 Comment, Add Yours!

  • Satellite internet provider to get them to provide you with internet access to your home or business – but you’d be out of luck there too! DSL providers often bundle their services with expensive home or business phone services. Or you will simply be out of range for quality DSL or other type of Internet Services…….

Leave a Comment

You may Log In to post a comment, or fill in the form to post anonymously.

  • Ramblings’ Jobs

    Post a Job - Just $99/30days
  • Event Calendar